Ram 1500 Maintenance Schedule (2019-2024)

This Ram 1500 maintenance schedule covers the 5th-generation DT body (2019-2024) – not the carried-over 4th-gen “Classic.” It spans the 3.6L Pentastar V6 with eTorque mild hybrid, the 5.7L HEMI V8 (with and without eTorque) and the 3.0L EcoDiesel V6, all paired with the ZF 8-speed automatic. Like most modern trucks, the Ram schedules oil by an Oil Change Indicator rather than a fixed mileage.

10K
Oil (Max Interval)
16
HEMI Spark Plugs
~8K
Tire Rotation
200K+
Expected Lifespan

The 5th-generation Ram 1500 (DT) launched for 2019 with a sharper focus on refinement and efficiency. The volume engine is the 3.6L Pentastar V6, which on most DT trucks carries Ram’s eTorque 48-volt mild-hybrid system. The 5.7L HEMI V8 is offered with or without eTorque, and a 3.0L EcoDiesel V6 returned for 2020. Every engine uses the ZF-designed 8-speed automatic (the 8HP family).

Ram does not print a simple mileage table for oil. Instead the truck runs an Oil Change Indicator that watches how you drive and posts a “Change Oil” message when service is due – typically somewhere between 8,000 and 10,000 miles on the gas engines, with a hard ceiling you should never exceed. This guide translates the indicator and the rest of the schedule into real intervals and fluid specs for each engine.

Understanding the Oil Change Indicator

Your Ram watches engine operating conditions and lights a “Oil Change Required” message when the oil is near the end of its useful life – it is not a fixed mileage. On the gas V6 and V8 this usually lands around 8,000-10,000 miles, but Ram also sets a maximum of 10,000 miles or 12 months between changes, whichever comes first, even if the message has not appeared. The EcoDiesel uses its own oil-life logic and spec oil. Reset the indicator after every change.

MyAutoLog app icon
The Ram Companion

Ram 1500 loves
proper maintenance.

Add your Ram 1500 in seconds. Get automatic maintenance reminders and track every service in one simple place.

Download on the App Store Get it on Google Play
Free on iOS & Android · No account needed

Ram 1500 maintenance schedule

Ram schedules oil by the Oil Change Indicator; the other items run on the mileage intervals below. Follow the earlier of the indicator message or the time/mileage limit, and shorten everything under severe-duty use (towing, heavy hauling, dust, extended idle).

5th-Gen Ram 1500 Service Schedule
Service Interval Notes
Engine Oil & Filter Indicator / 10K Max Oil Change Indicator; 10K mi or 12 mo ceiling
Tire Rotation ~8K Typically paired with the oil change
Engine Air Filter ~30K Sooner in dusty or off-road use
Cabin Air Filter ~20-30K Sooner in dusty conditions
Transmission Fluid (ZF 8-spd) ~60K Severe No fixed normal interval; fluid-for-life only in light duty
Spark Plugs (3.6L) ~100K 6 plugs; verify interval by year
Spark Plugs (5.7L HEMI) ~100K 16 plugs – two per cylinder
Engine Coolant (Mopar OAT) 10 Yr / 150K Purple OAT; then every 5 yr / 100K
Brake Fluid ~2-3 Yr Flush on condition / moisture content
Front & Rear Axle Fluid (4×4) Severe / Towing Inspect; change under heavy-duty use
Transfer Case Fluid (4×4) Severe / Towing Change under heavy-duty use
MyAutoLog app icon Never miss a service

Know exactly when your Ram 1500 needs attention.

This schedule, on autopilot. Reminders arrive by mileage or date, before anything’s overdue.

Download on the App Store Get it on Google Play

Oil Change Specifications

3.6L Pentastar V6 (eTorque) Specs

The 3.6L Pentastar is the standard DT engine and on most trucks carries the eTorque 48-volt mild-hybrid belt-starter-generator. It takes 0W-20 full synthetic meeting Chrysler MS-6395.

Oil Type 0W-20 Full Synthetic
Oil Spec Chrysler MS-6395
Capacity (w/ Filter) 5.0 Quarts
Oil Filter Mopar cartridge
Oil Change Indicator ~8K-10K mi
Max Interval 10K mi / 12 mo

5.7L HEMI V8 (eTorque optional) Specs

The 5.7L HEMI is offered with or without eTorque. Both use roughly 7 quarts with a filter. Note the viscosity change: Ram listed 5W-20 (MS-6395) on earlier DT trucks and moved to 0W-20 on the later ones – check your filler cap.

Oil Type 5W-20 or 0W-20 (by year)
Oil Spec Chrysler MS-6395
Capacity (w/ Filter) 7.0 Quarts
Spark Plugs 16 (2 per cylinder)
Oil Change Indicator ~8K-10K mi
Max Interval 10K mi / 12 mo

3.0L EcoDiesel V6 Specs

The 3.0L EcoDiesel V6 (Gen 3, 2020+) is a torque-rich turbodiesel. It requires a full-synthetic 5W-40 diesel oil and has a much larger sump than the gas engines. Use only diesel-rated oil meeting the Chrysler spec.

Oil Type 5W-40 Full Synthetic (diesel)
Oil Spec Chrysler MS-12991
Capacity (w/ Filter) ~8.5 Quarts
Oil Filter Mopar cartridge
Diesel Exhaust Fluid DEF / AdBlue
Max Interval Per oil-life monitor
Don't Exceed the 10,000-Mile Ceiling

The Oil Change Indicator can read high on easy highway driving, but Ram still caps the gas engines at 10,000 miles or 12 months between changes. Under severe duty – towing, heavy loads, dusty or off-road use, or lots of idling – change oil well before the message appears. On eTorque trucks, use oil that meets MS-6395 exactly; the stop/start system cycles the engine far more often than a conventional truck.

OEM Part Numbers

Genuine Mopar parts keep fitment and warranty coverage right. Engine, model year and 4×4 configuration all change the correct part, so confirm every number against your VIN before ordering – the specs below are the designations to match.

Parts & Fluid Reference
Component Part / Spec Application
Engine Oil (3.6L / 5.7L) 0W-20 (MS-6395) Gas engines; HEMI 5W-20 on earlier yrs
Engine Oil (3.0L Diesel) 5W-40 (MS-12991) EcoDiesel; full synthetic, diesel-rated
Transmission Fluid ZF 8&9 Speed ATF ZF 8-speed – NOT ATF+4
Engine Coolant Mopar OAT (Purple) MS.90032; 10-yr/150K formula
Brake Fluid DOT 3 Verify DOT 3 vs DOT 4 by VIN
Rear Axle Fluid 75W-90 (MS-A0160) +LS additive if limited-slip; HD 75W-140
Front Axle Fluid (4×4) 75W-85 Synthetic GL-5 Front differential
Transfer Case Fluid (4×4) ATF (case-specific) Part-time vs 4WD AUTO differ – verify
Spark Plugs (5.7L HEMI) Iridium (NGK/Mopar) 16 plugs; verify number by VIN
Spark Plugs (3.6L V6) Iridium (NGK/Mopar) 6 plugs; verify number by VIN
MyAutoLog app icon
Don’t bookmark it. Track it.

Every interval in this guide, tracked for you.

Skip the spreadsheet. Your Ram 1500’s schedule loads automatically and tells you what’s next.

Download on the App Store Get it on Google Play
  • Schedule pre-loadedPick your Ram 1500 and the intervals are set up for you.
  • Smart remindersNudges by miles or months, whichever comes first.
  • Full service historyEvery oil change and repair, logged in one place.
Free on iOS & Android · No account needed

4×4 Driveline Service

On a 4×4 Ram 1500, the front and rear differentials and the transfer case all hold gear oil or ATF that is easy to forget – and critical if you tow, haul or drive off-road. Ram lists no routine normal-duty interval, but calls for inspection and a change under severe-duty use.

The rear differential uses roughly 2.6 quarts of 75W-90 gear oil (Chrysler MS-A0160); a limited-slip axle also needs a friction-modifier additive, and some heavy-duty axle ratios specify 75W-140. The front differential on 4×4 trucks holds about 1.7 quarts of 75W-85 synthetic GL-5. The transfer case holds about 1.6 quarts of ATF, but the exact fluid differs between the part-time and 4WD-AUTO cases – match the case on your truck.

Rear Axle Fluid 75W-90 (MS-A0160)
Rear Axle Capacity ~2.6 qt
Front Axle Fluid 75W-85 Synth GL-5
Front Axle Capacity ~1.7 qt
Transfer Case Fluid ATF (case-specific)
Transfer Case Capacity ~1.6 qt
eTorque 48-Volt Mild Hybrid

On eTorque trucks a 48-volt belt-starter-generator replaces the conventional alternator and feeds a small 48-volt lithium-ion battery pack. It powers an aggressive stop/start and brief torque assist, and is designed to be maintenance-free in normal use. If you see a “Service Stop/Start” or “eTorque System Service Required” message, have the 48V battery, the belt-generator and its grounds checked – and always replace the 12V battery with the correct AGM spec.

Driveline Service Intervals
Service Normal Severe / Towing
Rear Axle Fluid Inspect / fluid-for-life ~45,000-60,000 mi
Front Axle Fluid (4×4) Inspect ~45,000-60,000 mi
Transfer Case Fluid (4×4) Inspect ~45,000-60,000 mi
Transmission Fluid (ZF 8-spd) Fluid-for-life (light duty) ~60,000 mi

Severe Conditions Schedule

Ram defines severe operating conditions that call for shorter intervals – and trucks spend far more of their lives there than cars do. If your Ram tows, hauls, plows, idles or works in dust, use the accelerated intervals below.

Severe Conditions Include

• Frequent trailer towing or heavy hauling
• Extended idling or low-speed, stop-and-go use
• Driving in dusty, sandy or off-road conditions
• Plowing, commercial or fleet duty
• Short trips in cold weather or sustained extreme heat

Accelerated Intervals
Service Severe Interval vs Normal
Engine Oil & Filter Well before indicator Change early
Transmission Fluid ~60,000 mi vs fluid-for-life
Axle & Transfer Case Fluid ~45,000 mi vs inspect only
Engine Air Filter ~15,000 mi ↓ ~50%

Frequently Asked Questions

Follow the Oil Change Indicator, which usually lands around 8,000-10,000 miles on the 3.6L and 5.7L gas engines. Ram also sets a hard ceiling of 10,000 miles or 12 months, whichever comes first – never exceed it. Under severe duty like towing, heavy loads, dust or lots of idling, change the oil earlier. The EcoDiesel follows its own oil-life monitor and uses 5W-40 diesel oil.
The 3.6L Pentastar takes about 5 quarts of 0W-20 full synthetic meeting Chrysler MS-6395. The 5.7L HEMI holds about 7 quarts; earlier DT trucks were specified 5W-20 and later ones 0W-20, both MS-6395, so check your oil filler cap. The 3.0L EcoDiesel needs roughly 8.5 quarts of 5W-40 full-synthetic diesel oil. Always confirm the capacity on the dipstick after filling.
The 5.7L HEMI uses 16 spark plugs – two per cylinder – which is part of the HEMI’s twin-spark combustion design. The practical replacement interval is around 100,000 miles with iridium plugs. Because there are 16 of them, a plug change costs more than on a typical V8, so budget for it. The 3.6L V6 has 6 plugs on a similar interval.
No – and this is a common and costly mistake. The 8-speed automatic in the DT Ram 1500 is a ZF-designed unit that requires Mopar ZF 8&9 Speed ATF, not the older ATF+4 used in many other Chrysler products. Using ATF+4 can damage the transmission. Ram treats the fluid as fill-for-life in light duty, but a change around 60,000 miles is smart if you tow or work the truck.
eTorque is Ram’s 48-volt mild-hybrid system. A belt-driven starter-generator replaces the conventional alternator and feeds a small 48-volt battery pack, enabling smooth stop/start and a brief torque boost. It is designed to be maintenance-free in normal use. If you see “Service Stop/Start” or “eTorque System Service Required,” have the 48V battery, belt-generator and grounds inspected, and always use the correct AGM 12V battery.
With the Oil Change Indicator respected, the right fluids used, and the 4×4 driveline and transmission serviced under severe duty, a 2019-2024 Ram 1500 will comfortably pass 200,000 miles. The biggest long-term risks are stretched oil changes on eTorque trucks, the wrong transmission fluid, and neglected axle and transfer-case service on trucks that tow.
Free Download

Keep your Ram 1500
running forever.

Add your Ram 1500 in 3 minutes. Get automatic reminders for every service interval — track every vehicle from one place.

Cross-shopping full-size trucks? See our complete Chevy Silverado 1500 maintenance schedule for oil, transmission and brake intervals.